EasyChem reactor is our innovative products, reactor by the reactor body, kettle cover, mixing system, heating system, control system and the main body of the cabinet.
reaction kettle body, kettle cover composition of the main part of the equipment, is the place of the media reaction. The whole process of the forging materials, the kettle body and the kettle cover both of the 6 trees (according to the number of different types of bolts with a uniform distribution of the main bolt assembly close. A sealing gasket is arranged between the kettle body and the kettle cover, and is sealed into a whole through the main bolt and the main nut. According to the different choice of the reaction medium, 316 stainless steel, titanium, and ha alloy materials can be used. The kettle cover is provided with a pressure gauge, an air valve and a needle valve, which can ensure the normal operation of the EasyChem under high temperature and high pressure.
EasyChem is the core component of the strong magnetic rotary stirring reactor soft magnetic drive coupler is a permanent magnetic material by magnetic coupling by the gear transmission shaft. It is I will be the principle of magnetic coupling and soft drive applied to the reactor on the typical innovation. The principle of magnetic coupler using magnet through stainless steel can still attract each other, producing a fine, compact and a sealing cover body with thread and the kettle cover connected with good, intermediate by metal or non metal gasket gasket and the kettle cover static seal, effectively prevent leakage. The sealing cover body are respectively provided with inner and outer rotor permanent magnet materials, rotor magnetic steel ring is composed of a small magnetic steel block, steel block N, S very scattered arrangement. Because of the characteristics of the magnetic steel attraction, repulsion, and magnetic positioning each other in the axial and rotational direction through the magnetic force. When the shaft drives the outer rotor, just follow the inner rotor for synchronous rotation, the inner rotor is driven by coupling reactor stirring shaft rotation, stirring to reach. Give up the packing seal structure of magnetic coupler, the magnetic rotor inside and outside penetration sealing cover new transmission body transfer torque with magnetic kettle and kettle body parts completely in the static seal cavity internal rotation, not out of the kettle body outside, completely solve the leakage problem of packing seal can not be overcome, the reaction medium is in absolutely closed state no leakage and pollution. The motor is the power source of the reaction stirring, and the output speed of the motor is controlled by the speed controller in the main machine. The motor is fixed on the mainframe box and drives the shaft to rotate through shaft coupling, and drives the rotating magnetic coupler, magnetic coupling through magnetic force inside and outside of the rotor, the motor torque produced by a sealing cover body without contact is transferred to the reactor driven stirrer rotation. According to different reaction medium, different stirring paddle is selected, and the function of the material in the fully stirred tank is achieved. The technical point of this technique is that the motor is buried in the motor and all the electrified lines.